Click
Reload
to refresh the port protection group information.
Click “Port Protect List”, enter the Port Protect Group Creating page:
Click
Reload
at the bottom control bar, refresh the Port Protect Group information.
Click
Delete
at the bottom control bar, delete the selected port protect group.
Click
Create
at the bottom control bar, enter the Port Protect Group Creating page:
Click
Set
at the bottom control bar, to finish the setting.
Click
Reload
at the bottom control bar, refresh the Port Protect Group Creating page.
Click
Go Back
at the bottom control bar, go back to the “Port Protect List” page.
4.5 Keepalive
Click
Security -> Keepalivel
at navigation bar in order
to enter port status configuration page as
following:
To Next Page
Loading...