There are listed the 64 values of DSCP in the IP DSCP mapping page, you can set the mapping
value per each DSCP.
Click
Clear
and then clean all of the DSCP mapping configuration.
Note:
The number of table parameter may be different between different device model.
9.5 Queue Management
Click
QoS/Priority -> Queue Management
at navigation bar in order, and then enter the
configuration page as following:
Click
Set
to save all configuration.
Note:
If one Queue ID set the bandwidth weight to Zero value. then the weight value of the other
queue ID must must be set to Zero.
To Next Page
Loading...