InHand InSwitch ISM-P Series - Navigation Bar; Configuration Display Area

WEB Configuration Manual
- 7 -
2.4.2 Navigation Bar
The contents in the navigation bar are shown in a form of list and classified according to types. By
default, the list is located at “system”. If a certain item need be configured, please click the group
name and then the sub-item. For example, to browse the flux of the current port, you have to click
“Diagnostics" and then “Ports”, “Statistics Table”.
Note:
The limited user can only browse the state of the device and cannot modify the
configuration of the device. If you log on to the Web with limited user’s permissions,
only “System” will appear.
2.4.3 Configuration Display Area
The configuration display area shows the state and configuration of the device. The contents of this
area can be modified by the clicking of the items in the navigation bar.