InHand InSwitch ISM-P Series - Dynamic MAC Mode; Switchport Protect

WEB Configuration Manual
- 22 -
Click
Modify
to modify static MAC filtration items.
Click
Create
to create new static MAC filtration items.
Click
Delete
at bottom control bar to delete the selected static MAC filtration items.
4.3.4 Dynamic MAC Mode
Click
Security -> Port Security
at navigation bar in order, and then click
Dynamic MAC Mode
to
enter configuration page as following:
Interface’s Dynamic MAC Mode could be configured at this page.
4.4 Switchport Protect
Click
Security -> Switchport Protect
at navigation bar in order to enter configuration page as
following:
Set the Port Protect Group at this page, click
Set
at the bottom control bar to finish the setting.