Through the dropdown boxes in the Status column, you can decide whether to enable multicast
storm control on a port. In the Threshold column you can enter the threshold value of the multicast
packets. The legal threshold range for each port is given behind the threshold.
7.1.3
Unicast Storm Control
Through the dropdown boxes in the Status column, you can decide whether to enable unicast
storm control on a port. In the Threshold column you can enter the threshold value of the unicast
packets. The legal threshold range for each port is given behind the threshold.
7.2 Port Rate Limits
Click
Switching -> Port Rate Limits
at navigation bar in order
to enter port rate limit page as
following:
To Next Page
Loading...