InHand InSwitch ISM-P Series - RIP Configuration; RIP Configuration Details

WEB Configuration Manual
- 50 -
Click
Reload
to refresh the static route information.
Click
Delete
to delete the selected Static Route items.
Click
Create
to create a new Static Route.
Note:
Only the Layer3 switches have the static route configuration page.
8.6 RIP Configuration
8.6.1 RIP Configuration
Click
Routing -> RIP Configuration
at navigation bar in order, and then enter RIP configuration
page as following:
You should have created a RIP process firstly, before do the RIP entry configuration. When
Edit
the RIP process can create the new RIP process or delete it also.
Click
Create
to create a new RIP process.