InHand InSwitch ISM-P Series - 802.1 D;P Mapping; IP DSCP Mapping

WEB Configuration Manual
- 54 -
You can set the Port CoS value by port, and then click
Set
to save the changes.
9.3 802.1D/p Mapping
Click
QoS/Priority -> 802.1D/p Mapping
at navigation bar in order, and then enter the
configuration page as following:
Click
Set
to save all 802.1D/p mapping configurations.
9.4 IP DSCP Mapping
Click
QoS/Priority -> IP DSCP Mapping
at navigation bar in order, and then enter the
configuration page as following: