InHand InSwitch ISM-P Series - OSPF Router Entries Configuration

WEB Configuration Manual
- 52 -
8.7.2 OSPF Router Entries
Click
Routing -> OSPF Configuration
at navigation bar in order, and then click
OSPF Router
Entries
to enter OSPF Router Entries configuration page as following:
Enter the OSPF process ID which was created already, click
Set
to enter the selected OSPF Router
Entries configuration page.
Click
Create
to create the OSPF Router Entries of OSPF process selected.
The format that the
Area
column can accept is an integer or IP address
。