3.3 ISE2016D
Front Panel Layout
1. Power source connection and alarm
connection terminal
2. Dip switch
3. Grounding screw
4. Cover plate
5. Power source one indication lamp
6. Power source two indication lamp
7. Alarm indication lamp
8. Optical port FX1 LINK/ACT
indication lamp
9. Optical port FX2 LINK/ACT
indication lamp
10. 100Base-FX single mode/multimode
FC/SC/ST interface FX1
11. 100Base-FX single mode/multimode
FC/SC/ST interface FX2
12.10/100Base-T(X) RJ45 port
13. InSwitch model number
14. DIN-rail bracket upper lip
15. Clamp spring
16. DIN-rail bracket attachment screw
To Next Page
Loading...