Dual power-supply redundant inputs
A warning can be produced via relay after power supply failure and
interruption of port connections
III. Front Panel Layout and Dimensions
3.1 ISE2005D
Front Panel Layout
1. Power source connection and alarm
connection terminal
2. DIP switch
3. Grounding screw
4. Cover plate
5. Power source one indicator lamp
6. FX2 LINK/ACT indicator lamp
7.100Base-FX single mode/multimode
FC/SC/ST interface FX1
8. 10/100Base-T(X) RJ45 interface
9. Alarm indicator lamp
10. Power source two indicator lamp
11. InSwitch model number
To Next Page
Loading...