InHand ISE Series - Ethernet Cables and Wiring Guide; Ethernet Cables and Wiring; 10;100 Base-T(X) Port Wiring

Step 3b: Alternatively, do not remove the screws, and directly remove the switch by
lifting while gently pulling it away from the wall, as shown in figure 4-7.
Figure 4-7
V. Ethernet Cables and Wiring
5.1 10/100Base-T(X) port
The RJ45 interface automatically detects 10/100Base-T(X) and MID/MDI-X
protocols. The RJ-45 ports may be connected with either a straight-through or
crossover cable and can automatically compensate for either type.
Attention: Standard CAT5 or CAT5e types twisted pair cabling shall be
used.
 Image of an RJ45 interface