InHand ISE Series - Ise3018 D

3.7 ISE3018D
Front Panel Layout
1. Power terminal
2. Dip switch
3. Grounding screw
4. Cover plate
5. Power source two indication lamp
6. Power source one indication lamp
7. GX1 LINK/ACT indication lamp
8. GX2 LINK/ACT indication lamp
9.1000Base-X,1000Base-T(X) SFP
interface GX1
10.1000Base-X,1000Base-T(X) SFP
interface GX2
11.10/100Base-T(X) RJ45 port
12. Alarm indication lamp
13. Optical port FX2 LINK/ACT
indication lamp
14.Optical port FX2 LINK/ACT
indication lamp
15.100Base-FX single mode/multimode
FC/SC/ST interface FX1
16.100Base-FX single mode/multimode
FC/SC/ST interface FX2
17. InSwitch model number