InHand ISE Series - Functions and Features; LED Indicator Codes

VI. Functions and Features
6.1 LED Indicator Codes
A variety of LED indicators are located on the front panel of the switch. Please see the
table below for definitions on each indicator.
Name of Indication
Lamp
Lamp State
ISE Equipment State
Power source indication lamp
PWR1
On
Connection of power source 1 normal
Off
Connection of power source 1 failure
PWR2
On
Connection of power source 2 normal
Off
Connection of power source 2 failure
Alarm indication lamp
FAULT
On
Switch equipment in alarm state
Off
Switch equipment in normal state
1000Base-X,1000Base-T(X) indicator lamp
GX1
…
GXn
On
Port connected
Flash
Data passing through
Off
Interruption of port connection
100Base-FX indicator lamp
FX1
…
FXn
On
Port connected
Flash
Data passing through
Off
Interruption of port connection
10/100Base-T(X) indicator lamp
Each 10/100Base-T(X) RJ45 interface is provided with a red lamp and a green lamp.
The red lamp indicates port rate, and the green lamp indicates port connection state.
Red lamp
On
Port connected
Off
Interruption of port connection
Green lamp
On
Optical port connected
Flash
Data passing through
Off
Interruption of port connection