INIM Electronics Prime Series

Installation manual
The control panel and peripherals 13
H Ground connection screws
I Frontplate earth wire
J Wires between switching-power and control panel
K Fixing-screw locations for the metal enclosure
L Compartment for backup battery
M FLEX5/U or Nexus expansion board location holes
N Lateral cable entries (on the sides of the box)
Table 2-5: Control panels - description of parts
Models
Prime
Prime060S
Prime060L
Prime120L
Prime240L
Prime control panel board
O
C
E
F
H I
J
K
M
N
P
A
B
L
D
F
A
P
P
G G
G G
Table 2-6: Mother board - description of parts
A Connector for the power supply to board wires
B Open-panel tamper microswitch
C SmartLogos30M voice-board connector
D RESET System reset button
EFACTORY Button to reset default settings (factory settings)
F Connector for the optional board
G Fixing holes for the optional board
H Dislodgement-tamper microswitch connector (accessory item)
I Connector for the open-panel tamper microswitch (accessory item)
J Maintenance jumper connectors
K
VCC
Green power LED
RUN Blue activity LED
BUS Yellow BUS activity-on-BUS LED
PSTN Red PSTN-fault LED
L RJ45 connector for the LAN network
M Green USB-connected LED
N MicroUSB connector
O Ancillary earth contact
P Terminal board