16 The control panel and peripherals
Anti-intrusion control panels
2-2
Environmental Conditions
Prime control panels must not be installed outdoors and are suitable for operating under the
following conditions:
• Temperature: from -10° to +40°C
• Maximum humidity:75% (without condensation)
• Environmental Classification:II
The peripherals must not be installed outdoors and are suitable for operating under the
following conditions:
• Temperature: from -10° to +40°C
• Maximum humidity:75% (without condensation)
• Environmental Classification:II
The nBy/S reader is suitable for outdoor installation and operates best under the following
conditions:
• Temperature: from -25° to +70°C
• Maximum humidity:93% (without condensation; for 30 days per year granting that the
relative humidity can touch points of 95% without being subject to condensation)
• Protection grade:IP 34
• Environmental classification:IV
2-3
Peripherals
The Prime system provides for the use of devices connectible to the control panel via I-BUS:
• JOY/GR, JOY/MAX, Aria/HG, nCode/G, Concept/G, Alien/G e Alien/S keypads
• Readers (nBy/S and nBy/X)
• Expansions (Flex5)
• Transceiver (Air2-BS200)
• Sounderflashers (Ivy-B)
• 2G/3G dialers (Nexus)
•Isolators (IB200)
ATTENTION!
The connectible peripherals must have firmware versions higher than or equal to 5.00.
2-3-1
Joy/GR and Joy/MAX keypads
• Backlit graphic display
• Icon Easy4U interface
•4 indicator LEDs
• Signal buzzer
• Tamper and opening protection
• Mounts to “503” outlets
• 2 Input/Output terminals
Joy/MAX only:
• Thermometer and chronothermostat function
• Microphone and loudspeaker for voice functions
• Built-in proximity reader
Table 2-10: Joy - electrical and mechanical features
Model JOY/GR JOY/MAX
Voltage
from 9 to 16V
Typical current draw
70mA 90mA
Terminals configurable as OC outputs
2
Maximum current draw per terminal
150mA
Dimensions (W x H x D)
142 x 116 x 24 mm
Weight
160g 180g
To Next Page
Loading...
