Installation manual
General information 7
1-4
Manuals
INSTALLATION
AND
PROGRAMMING
GUIDE
The guide, supplied with each control panel, provides all the instructions and illustrations
necessary for fast installation and programming of the Prime system.
It provides step by step descriptions of the procedures required for the system wiring, the
various connections and first powerup. It also provides a table for the peripheral addressing
process and a quick guide indicating default parameters and values and how to program/
change them.
INSTALLATION
MANUAL
(THIS MANUAL)
The installation manual contains the technical specifications of all the system components and
the instructions for their installation, including instructions with wiring diagrams relating to
the various modules.
It also contains the instructions for system commissioning
In order to provide adequate protection, the installer must adhere to all the manufacturer's
guidelines relating to the active and passive security devices of this system.
MANUAL FOR
SYSTEM
PROGRAMMING
The Programming manual contains instructions for the configuration and programming of the
Prime system, as well as the descriptions of all the parameters and options, irrespective the
means chosen for system programming (keypad, software, etc.).
It also contains the instructions for commissioning, maintenance and troubleshooting
techniques.
SOFTWARE
MANUAL
The Prime/STUDIO software manual contains the description of the software and the
instructions for its installation and use.
It is the duty of the person who programs the Prime system to adhere to the instructions and
to have complete knowledge of the software in order to proceed swiftly and properly with the
configuration and programming procedures.
SUPPORT MANUAL
This manual provides the installer and programmer of the Prime system with useful
information.
USER'S MANUAL
This manual contains instructions relating to the user interface of the Prime system, its
functions and how to use them.
This manual is supplied with every control panel and must be given to the end-user for
consultation. It is the duty of the installer to ensure that the end-user fully understands how
the system works and is aware of the configuration set by the installer.
The manuals which are not supplied with the apparatus can be ordered, making reference to
their respective codes, or downloaded from www.inim.biz
.
1-5
Operator Qualifications
INSTALLER
The installer is the person (or group of persons) who sets up and programs the entire security
system in accordance with the purchaser's requirements and in respect of the safety laws in
force. As the only individual in contact with system users, it is the installer's responsibility to
instruct them on how to use the security system properly.
Under normal circumstances, the installer is not allowed to arm/disarm the system without
previous authorization from the user. All the system partitions must be disarmed before
accessing the parameter programming phase.
The access code of the installer is a level 3 access code.
USER
The users are the occupants of the building where the Prime intrusion control panel is
installed. Only authorized users can access and operate the system.
Thanks to the extreme flexibility of the system, the most common operations can be carried
out without authorization. This operating method must be expressly requested by the main
user, as it considerably lowers the security level of the system and may cause false alarms,
accidental arm/disarm operations, etc.
To Next Page
Loading...
Need help?
General
