INIM Electronics Prime Series

Installation manual
The control panel and peripherals 9
Chapter 2 The control panel and peripherals
2-1
Prime control panels
2-1-1
Package contents
Inside the package you will find:
• Metal enclosure containing the motherboard and wired power supply
• User's Manual
• Quick guide to installation and programming
• Plastic bag containing:
- 20 3k9 Ohm 1/4W resistances
- 20 6k8 Ohm 1/4W resistances
- Backup-battery wire
- Earth connection ring terminal
- Ring terminal nut
- Thermal probe for optimization of the battery charging process
- 3 screws to secure the frontplate of the metal enclosure
- “INIM Electronics security-protected area” sticker
The control panel data labels are affixed to the outside of the control panel enclosure.
2-1-2
Control panel descriptions
INIM
Electronics
security-
protected
area
Table 2-1: Control panels - electrical and mechanical features
Prime control panel models Prime060S Prime060L Prime120L Prime240L
Voltage
power supply 230V ~ -15% +10% 50/60Hz
nominal output 13,8V
output range from 9 to 13.8V
Current draw
maximum 0.5A 1.1A
of control panel mother-
board
180mA @ 13.8V
Fault voltage on power outputs 9.8V
Threshold for protection
from deep discharge 9.5V
from overload 15.4V
Maximum power-supply voltage ripple 550mV 200mV
PS type A
Maximum voltage on I-BUS 4A
Type of alarm notification (EN 50131-1, par. 8.6)
D (
a
)
IP Protection grade 30
Enclosure Dimensions (W x H x D) 27.5 x 37.4 x 8.6 cm 37.5 x 46.6 x 9.2 cm
Weight (without battery) 3.2Kg 5Kg
Security grade
EN50131-3 3
EN50131-6 3
a. Also notification types A, B and C are possible depending on the configuration of the control panel and system.