▪ Plug the System Power Cord into an appropriate electrical outlet.
3.4 Moving the System
▪ Turn the System off.
▪ Disconnect the Power Cord.
▪ Disconnect the Handpiece.
▪ Disconnect the Footswitch.
▪ Release the Wheel Brakes.
▪ Slowly push or pull the System using the handle.
▪ When moving the System to another facility, lift the System to the vehicle and lay
it carefully on its side.
Never lift, pull or push the System using the operating panel.
Always use the handles when moving the System.
Upon unpacking, check the System for mechanical damage (e.g., cracks in
the cable insulation).
3.5 System Disposal
To comply with European Commission Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE) and other country and state regulations, please DO
NOT dispose of this equipment in any location other than designated locations.
To Next Page
Loading...
