13 / 68
2.5. Assembling the INMOTION SCV
2.5.1. Unpacking the box
Any missing or visibly damaged parts should be reported to your dealer immediately.
5. Installation Tool and a spare Screw
2. Handlebar (R1EX uses ABS materials, and Carbon Fiber
Handlebar is optional.)
6. SmartKey and a Micro USB cable
3. Turning Shaft and a Screw
7. User Manual, Warranty Card, Product Certification
and Useful Tips Manual
8. 4 Ah Lithium Battery Pack (a Useful Tips Manual is included.)
All INMOTION SCV parts must be approved by INMOTION, and properly installed.
Never attempt to stand on an INMOTION SCV without the Turning Shaft properly attached.
Using your INMOTION SCV without all parts properly installed could damage your INMOTION SCV and result in serious
injury from loss of control, collisions, and falls.
Do not modify the INMOTION SCV. Modifications to the INMOTION SCV without the prior written approval of
INMOTION could interfere with the operation of the INMOTION SCV, and result in serious injury or damage.
To Next Page
Loading...
Need help?
General
