53 / 68
Failure to charge the Battery Pack properly could result in permanent damage. If the Battery Pack is excessively discharged, it
could also cause serious damage.
Be sure to use the original charger for INMOTION charging.
Please carefully read the Safety Notes before you use the Battery Pack.
4.3.1. Charging Procedures
To charge the Battery Pack:
1. Open the Charge Port of your INMOTION SCV. Verify that
the Charge Port is dry.
2. Plug one end of the Power Cord into the Charge Port of your
INMOTION SCV with the INMOTION LOGO on the charger
facing up. Plug the other end of the Power Cord into an AC outlet
(100 V~ 240 V; 50 Hz or 60 Hz).
3. Verify that the Charge Indicator lights are red, which
indicates the INMOTION SCV is charging. When charging
completes (indicator lights turn green), unplug the charger from the
electrical outlet.
4.3.2. Charging Indicator
The Info LED shows the current Battery life. The Battery gauge blinks to indicate the Battery Pack is charging (for example,
the fourth bar is flashing when the current Battery amount is at 3 bars.).
To Next Page
Loading...
Need help?
General
