Inner Range Concept 2000 User Manual

C2000 User Manual
Page 20 of 26
PROGRAMMING
The Concept 2000 is an extremely powerful system that will be fulfilling security needs well into the 21
st
Century.
This versatility is the result of thousands of programming options available throughout the Concept 2000 system and, as
a result, this module is usually restricted for use by the Installer only.
The Installer, User 001, has the same system access levels as the Master User, User 000, and has the added feature of
being able to program the system.
It is strongly recommended that, once the Installation has been completed, the Master User prevents any further
unauthorized changes to the programming by “locking Out” User 001. (See “Dis-able User 001”)
If your Installer is required to make any authorized changes to programming, the Master User must enable User 001
before the Installer can gain access to the system.
11.1 REMOTE SERVICE DIAGNOSTICS
The Installer may service and program your Concept 2000 over the telephone line by dialing into the system. This is a
very powerful service diagnostics facility.
When User 001 is dis-abled, remote service over the telephone line cannot be performed.
Again, the Master User would have to enable User 001 before any remote programming can be effected.
Provided for Download by www.bendigosecurity.com.au

Inner Range Concept 2000 Specifications

General

Brand	Inner Range
Model	Concept 2000
Category	Security System
Language	English