5.9.2 Function Explanation
Picture Set: picture setting option
Sound set: sound setting option
Brightness standard: set projector brightness mode “Cinema mode, Eco mode1, Eco mode2”
Dynamic Con: turn on the option, projector will adjust contrast ratio automatically through
different projection images
Input source: sources setting option
3D: 3D mode setting
Keystone: keystone correction setting
Projection type: Front, Rear, Ceiling mount projection etc option
Auto reverse (realize image reverse automatically through projection type)
Language: set projector language
Upgrade: upgrade the projector hardware
Instruction: after insert the TF-card equipped with projector, click on “Instruction” to get the
electronic user manual
Reset factory: renew to factory default setting
5.9.3 Keystone Correction
Auto keystone correction: turn on, the projector will correct keystone automatically
to the projection imagecorresponding
Manual adjustment: vertical +-40degrees
23
To Next Page
Loading...
