28
6.3 Use DLP-LINK (DLP-Ready) type glasses
1 Press the button on the glasses when watching 3D images.
2 The glasses will flick after press the button, and synchronize with 3D images.
(The flashing is a unique operation of DLP-LINK type glasses. This may be different due
to the different types of glasses.
3 If glasses flashes When viewing 3D images or there is a problem, please turn off the lights .
Please contact your projector Machine vendors, consulting glasses aspects.
Supported 3D Input format
* Only HDMI channel support 3D,projector recognize 3D signal automatically.
* The maximum resolution in 3D mode is 1280x720。
* Some menu may not work in 120HZ input.
Input Resolution Vertical Frequency (Hz)
HDMI 1280x720 120
Notice for viewing 3D image
* If screen rock from side to side, because the computer configuration is not
enough, please select higher configuration.
* When Watch the 3D images, you can press the button on the glasses to
switch the image play direction left / right.
* It is a normal phenomenon if the picture partial red or ghosting without 3D
glasses to watch. Please wear 3D glasses to watch.
* You can not change the 3D images size.
To Next Page
Loading...
