‑35‑
4 Communication Wiring
4.1 Communication Networking
This PLC can be connected to other sites, ERP, MES and other systems through
Ethernet interface, or connected to other slaves (such as MD520, MD800, SV660N and
SV680N drives) or other modules with EtherCAT function through EtherCAT interface.
With GE20 series extension cards, this PLC can also be connected to H5U, SV630C, and
IR311 series industrial robots through RS485 or RS232 communication, as shown
below.
4.2 Cable Selection
The cable lug and cable diameter included in the following table are only for
reference.
To Next Page
Loading...
