Inovance AM600 Series - Page 24

23
ModBus COM0 error
Check the detailed fault
information in the software.
ModBusTcp error
Check the detailed fault
information in the software.
CANopen Indication Remedy
Slave error
Check the connection between
slave rack modules.
Slave hardware
󶍾
󶍾
slave rack module is consistent
with that in the software.
Slave module error
Check whether the slave rack
module reports a fault, and check
the detailed fault information in
the software.
CANopen master bus
disabled
Check whether the CANopen
function of the master is disabled
or the CANopen communication
of the master is abnormal.
CANlink Indication Remedy
Bus error (BUS OFF)
Check bus connection. Check the
detailed fault information in the
software.
󶍿 󶍾
(Master) no online
slave
Check the connection of slaves
and parameter setting.
(Master) slave
disconnected
Check the connection of slaves.
󶍾
command frame
error
󶍾
parameters.