Inovance AM600 Series - Page 5

4
Operation and Maintenance
=GXTOT
M
 Maintenance & inspection must be carried out by personnel who have the necessary
electrical training and experience.
 Do not touch the terminals while the power is on. Failure to comply may result in
electric shock or malfunction.
 Disconnect all external power supplies of the system before cleaning the module or re-
tightening screws on the terminal block or screws of the connector. Failure to comply
may result in electric shock.
 Disconnect all external power supplies of the system before removing the module or
connecting/removing the communication wirings. Failure to comply may result in
electric shock or malfunction.
)G[ZOUT
 󶍾
RUN/STOP operation.
 Disconnect the power supply before installing/removing the extension card.
Disposal
)G[ZOUT
 Treat scrapped module as industrial waste. Dispose the battery according to local laws
and regulations.