- 6 -
Safety Instructions
◆
Perform daily and periodic inspection and maintenance for the equipment
according to maintenance requirements and keep a maintenance record.
Repair
◆
Equipment installation, wiring, maintenance, inspection, or parts replacement
must be performed by only professionals.
◆
Do not repair the equipment at power-on. Failure to comply will result in an
electric shock.
◆
Before inspection and repair, cut o all equipment power supplies and wait at
least 10 minutes.
◆
Require for repair services according to the product warranty agreement.
◆
When the equipment is faulty or damaged, require professionals to perform
troubleshooting and repair by following repair instructions and keep a repair
record.
◆
Replace quick-wear parts of the equipment according to the replacement
guide.
◆
Do not operate damaged equipment. Failure to comply may result in worse
damage.
◆
After the equipment is replaced, perform wiring inspection and parameter
settings again.
Disposal
◆
Dispose of retired equipment by following local regulations or standards.
Failure to comply may result in property damage, personal injuries, or even
death.
◆
Recycle retired equipment by following industry waste disposal standards to
avoid environmental pollution.
To Next Page
Loading...
