Inovance MD280 Series - Page 102

Function Parameter Table MD280/MD280N User Manual
- 102 -
Function code Name Setup Range
Minimu
m Unit
Factory
Default
Value
Change
7: Constant speed over
voltage(ERR07)
8: Buffer resistance overload fault
(ERR08)
9: Under voltage fault (ERR09)
10: Inverter overload (ERR10)
11: Motor overload (ERR11)
12: Input phase fault (ERR12)
13: Output phase fault (ERR13)
14: Radiator overheating (ERR14)
15: External fault(ERR15)
16: Communication fault (ERR16)
17: Contactor on/off fault (ERR17)
18: Current detection fault
(ERR18)
19:Motor tuning fault
20: Reserved (ERR20)
21: EEPROM read/write fault
(ERR21)
22: Reserved
23: Motor to ground short circuit
fault(ERR23)
24: Reserved (ERR24)
25: Reserved (ERR25)
26: Running time arrival (ERR26)
31:Software over current fault
˄ERR31˅
40˖
Fast current limit and overtime
fault˄ERR40˅
41: Swithing motor fault˄ERR41˅
efesotomasyon.com