Parameter Description MD280/MD280N User Manual
- 188 -
If it is the two-phase inverter, 100.0% corresponding 200.0V, it indicates
that enter the under-voltage status.
Zero-current detection level
Factory
default
value
5.0%
FB-29
Setup
range
0.0% to 300.0%
100.0% corresponding motor rated current
Zero-current detection delay
time
Factory
default
value
0.10s
FB-30
Setup
range
0.01s to 600.00s
When the motor is running, if the current of the inverter is below FB-29, and
the continuous time arrive FB-30, the DO output the ‘zero-current is
detected’˄DO-18˅.
efesotomasyon.com
To Next Page
Loading...
