Fault Diagnosis and Countermeasures MD280/MD280N User Manual
- 208 -
Fig.8-12 Module overheating (ERR14)
Err15
If it is stopped by pressing the STOP
key in the non keyboard operation mode
If it inputs external fault signal via
the multifunctional terminal DI
Stop the unit with the key STOP
under stall condition
Reset to run
Check and remove
the external fault
Reset to run
External equipment fault
Yes
Yes
Yes
No
No
Fig.8-13 External equipment fault (ERR15)
efesotomasyon.com
To Next Page
Loading...
