MD280/MD280N User Manual Mechanical and Electrical Installation
- 45 -
MD series inverters of above 18.5G/22P employ sheet-metal enclosures.
Refer to Fig.3-3 for the removal of the upper cover of the sheet-metal
enclosure. Loosen the screws of the upper cover directly with tools.
Danger
When removing the lower cover, avoid the falling of the lower cover, which
may cause human injury or damage to the equipment.
Lower Cover Plate Lower Cover Plate
Fig.3-3 Removal of Lower Cover of the Sheet-Metal Enclosure
efesotomasyon.com