Inovance MD290 Series User Manual

6. Description of Parameters
- 140 -
6
Ƶ
F6-10 = 0: Decelerate to Stop
Once the stop command is input, the AC drive decreases the output frequency based on
the deceleration time to 0.
Figure 6-33 Decelerate to stop
Acceleration time
Output frequency
RUN command
Deceleration time
Ƶ
F6-10 = 1: Coast to Stop
Once the stop command is input, the AC drive immediately stops output. The motor then
coasts to stop based on the mechanical inertia.
Figure 6-34 Coast to stop
Acceleration
time
Output frequency
Start command
The AC drive stops output immediately.
Actual motor speed

Inovance MD290 Series Specifications

General

Brand	Inovance
Model	MD290 Series
Category	DC Drives
Language	English