Inovance MD290T45G/55P - Page 18

1. Product Information
- 17 -
1
Item Description
Individualized
functions
Power dip ride-through Load feedback energy compensates for any voltage
reduction, allowing the drive to continue to operate
for a short time during power dips.
Overcurrent fast prevention The function helps to avoid frequent overcurrent
faults.
Virtual I/O Five groups of virtual digital input/outputs (DI/DO)
support simple logic control.
Timing control Time range: 0.0 to 6500.0 minutes
Dual-motor switchover The drive have two groups of motor parameters and
can control up to two motors.
0XOWLSOH¿HOGEXVHV 7KHGULYHVXSSRUWVIRXU¿HOGEXVHV
Ɣ
Modbus-RTU
Ɣ
PROFIBUS-DP
Ɣ
CANlink
Ɣ
CANopen
Motor overheat protection Option: The optional input/output (I/O) extension
card allows AI3 to receive a signal from the motor
temperature sensor input (PT100, PT1000) to
implement motor overheat protection.
User programmable function Option: The optional programming card supports
secondary development in a programming
environment compatible with the Inovance
programmable logic controller (PLC).
Advanced PC software 7KHHVRIWZDUHDOORZVXVHUVWRFRQ¿JXUHVRPH
operating parameters, and provides a virtual
oscilloscope display that shows system status.