Appendix
- 322 -
12
Para. No. Para. Name Setting Range Default Property Page
F9-15 2nd fault type 5: Overvoltage during
acceleration
6: Overvoltage during
deceleration
7: Overvoltage at constant
speed
8: Pre-charge resistor fault
9: Undervoltage
10: AC drive overload
11: Motor overload
12: Input phase loss
13: Output phase loss
14: IGBT overheat
15: External fault
16: Communication fault
17: Contactor fault
18: Current detection fault
19: Motor auto-tuning fault
21: EEPROM read-write fault
22: AC drive hardware fault
23: Motor short circuited to
ground
24: Reserved
25: Reserved
26: Accumulative running time
reached
8VHUGH¿QHGIDXOW
8VHUGH¿QHGIDXOW
29: Accumulative power-on
time reached
30: Load loss
31: PID feedback lost during
running
40: Pulse-by-pulse current limit
fault
41: Motor switchover fault
during running
42: Reserved
43: Reserved
55: Slave fault in master/slave
control
- Ɣ -
F9-16 3rd (latest) fault type - Ɣ -
F9-17 Frequency upon 3rd fault - - Ɣ -
F9-18 Current upon 3rd fault - - Ɣ -
F9-19 Bus voltage upon 3rd fault - - Ɣ -
F9-20 DI state upon 3rd fault - - Ɣ -
F9-21 DO state upon 3rd fault - - Ɣ -
F9-22 AC drive state upon 3rd fault - - Ɣ -
F9-23 Power-on time upon 3rd fault - - Ɣ -
F9-24 Running time upon 3rd fault - - Ɣ -
To Next Page
Loading...
