2. Mechanical Installation
- 41 -
2
Step 3: Install the AC drive in the cabinet.
Ɣ
Remove the front cover from the drive (refer to
2
.
5
R
e
m
o
v
e
a
n
d
R
e
¿
t
t
h
e
F
r
o
n
t
c
o
v
e
r
). Then
the handle is exposed.
Ɣ
Arrange two persons to align castors of the drive to the guide rail.
Figure 2-20 Align castors of the drive to the guide rail
Guide rail (optional)
Ɣ Push the drive into the cabinet slowly. Please use auxiliary strap in the process of push-in to
SUHYHQWWXUQRYHUDVVKRZQLQWKHIROORZLQJ¿JXUH
Figure 2-21 Push the drive into the cabinet
Because the center of gravity of the
drive is too high, please use soft strap
(with hook at both ends) in the process
of push-in to prevent turnover.
To Next Page
Loading...
Need help?
General