Inovance MD500T37GB-INT - Keys on LED Operating Panel

4. Operating Panel (Keypad & Display)
- 55 -
4
■
Keys on LED Operating Panel
Key Key Name Function
PRG
Programming ● Enter or exit Level I menu.
● Return to the previous menu.
ENTER
Conrm ● Enter each level of menu interface.
● Conrm displayed parameter setting.
Increment ● When navigating a menu, it moves the selection up through the
screens available.
● When editing a parameter value, it increases the displayed value.
● When the AC drive is in RUN mode, it increases the speed.
Decrement ● When navigating a menu, it moves the selection down through the
screens available.
● When editing a parameter value, it decreases the displayed value.
● When the AC drive is in RUNNING mode, it decreases the speed.
Shift ● Select the displayed parameter in the STOP or RUNNING status.
● Select the digit to be modied when modifying a parameter value
RUN
RUN Start the AC drive when using the operating panel control mode.
It is inactive when using the terminal or communication control mode.
STOP
RES
Stop/Reset ● Stop the AC drive when the drive is in the RUNNING status.
● Perform a reset operation when the drive is in the FAULT status.
Note: The functions of this key can be restricted by using function F7-02.
MF.K
Multifunction Perform a function switchover as dened by the setting of F7-01, for
example to quickly switch command source or direction.
QUICK
Menu mode
selection
Press it to switch over between menu modes as dened by the setting of
FP-03.