Mechanical Installation
‑29‑
PPrreerreeqquuiissiitteess
Before removing the cover, ensure that the machine has been powered off for over 10
minutes.
PPrroocceedduurree
1. Use a screwdriver to remove the six fixing screws of the cover.
2. Hold the cover with both hands, and lift it up in the arrow direction to remove it.
1.2.4.2 Installing the Cover
The cover of the AC drive must be removed before wiring the main circuit and control
circuit. After wiring is done, re‑install the cover.
PPrroocceedduurree
To Next Page
Loading...
