Mechanical Installation
‑36‑
● During foundation design, take the following factors into consideration: sufficient
space in front of the cabinet for inspection, and wiring and cabling of power
supply cables, actuating motor cables, and system control cables. The cabinet
comes with a cable trench or cable guide. Separate power cables from signal
cables. Failure to comply will affect the operation of the AC drive. The following
figure shows the routing and related requirements.
Figure 1‑21 Foundation layout
1.3.6 Installing the External Braking Unit
PPrroocceedduurree
1. Remove the lateral closure plate of the cabinet.
To Next Page
Loading...
