Electrical Installation
‑39‑
2 Electrical Installation
2.1 Electrical Wiring Diagram
Figure 2‑1 Standard electrical wiring
Note
● For details on S1 to S4 DIP switches, see "
Table 2–3 Function description of control
circuit terminals
"
on page 44
.
● For three‑phase 380–480 VAC drives, a 0.4–75 kW model differs from a 90–450 kW
model in the wiring detail marked by the double arrows in the figure.
● For three‑phase 200–240 VAC drives, a 0.4–37 kW model differs from a 45–200 kW
model in the wiring detail marked by the double arrows in the figure.
To Next Page
Loading...
