Inovance MD800 Series - Page 117

Commissioning and Trial Run
‑116‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
A6‑06 42502 Curve 4 maximum
input
‑10.00 V to +10.00 V 10.00 V Modifiable
in any states
A6‑07 42503 Corresponding
percentage of curve 4
maximum input
‑100.0% to +100.0% 100.0 % Modifiable
in any states
A6‑08 42504 Curve 5 minimum
input
‑10.00 V to +10.00 V ‑10.00 V Modifiable
in any states
A6‑09 42505 Corresponding
percentage of curve 5
minimum input
‑100.0% to +100.0% ‑100.0 % Modifiable
in any states
A6‑10 42506 Curve 5 inflection 1
input
‑10.00 V to +10.00 V ‑3.00 V Modifiable
in any states
A6‑11 42507 Corresponding
percentage of curve 5
inflection 1 input
‑100.0% to +100.0% ‑30.0 % Modifiable
in any states
A6‑12 42508 Curve 5 inflection 2
input
‑10.00 V to +10.00 V 3.00 V Modifiable
in any states
A6‑13 42509 Corresponding
percentage of curve 5
inflection 2 input
‑100.0% to +100.0% 30.0 % Modifiable
in any states
A6‑14 42510 Curve 5 maximum
input
‑10.00 V to +10.00 V 10.00 V Modifiable
in any states
A6‑15 42511 Corresponding
percentage of curve 5
maximum input
‑100.0% to +100.0% 100.0 % Modifiable
in any states
A6‑16 42512 AI1 gain ‑10.00 to +10.00 1.00 ‑ Modifiable
in any states
A6‑17 42513 AI1 offset ‑100.0% to +100.0% 0.0 % Modifiable
in any states
A6‑18 42514 AI2 gain ‑10.00 to +10.00 1.00 ‑ Modifiable
in any states
A6‑19 42515 AI2 offset ‑100.0% to +100.0% 0.0 % Modifiable
in any states
A6‑20 42516 AI3 gain ‑10.00 to +10.00 1.00 ‑ Modifiable
in any states
A6‑21 42517 AI3 offset ‑100.0% to +100.0% 0.0 % Modifiable
in any states
A6‑24 42520 Jump point of AI1
input corresponding
setting
‑100.0% to +100.0% 0.0 % Modifiable
in any states
A6‑25 42521 Jump amplitude of
AI1 input
corresponding setting
0.0% to 100.0% 0.5 % Modifiable
in any states