Commissioning and Trial Run
‑117‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
A6‑26 42522 Jump point of AI2
input corresponding
setting
‑100.0% to +100.0% 0.0 % Modifiable
in any states
A6‑27 42523 Jump amplitude of
AI2 input
corresponding setting
0.0% to 100.0% 0.5 % Modifiable
in any states
A6‑28 42524 Jump point of AI3
input corresponding
setting
‑100.0% to +100.0% 0.0 % Modifiable
in any states
A6‑29 42525 Jump amplitude of
AI3 input
corresponding setting
0.0% to 100.0% 0.5 % Modifiable
in any states
A9‑00 43264 Online auto‑tuning of
asynchronous motor
rotor time constant
0: Disabled
1: Enabled
0 ‑ Modifiable
in any states
A9‑04 43268 Maximum torque limit
coefficient of
asynchronous motor
in field weakening
range
30–150 80 ‑ Modifiable
in any states
A9‑05 43269 Asynchronous motor
SVC speed filter
5–32 ms 15 ms Modifiable
in any states
A9‑06 43270 Asynchronous motor
SVC speed feedback
processing under
speed control
0: No operation
3: Fixed current output
during low‑speed running
0 ‑ Modifiable
in any states
A9‑07 43271 Asynchronous motor
magnetic field
adjustment
bandwidth under SVC
0.0–8.0 2.0 ‑ Modifiable
in any states
A9‑08 43272 Asynchronous motor
low‑speed running
current under SVC
30–170 100 ‑ Modifiable
in any states
A9‑09 43273 Switchover frequency
for asynchronous
motor fixed current
output under SVC
2.0–100.0 Hz 3.0 Hz Modifiable
in any states
A9‑10 43274 Asynchronous motor
speed fluctuation
suppression
coefficient under SVC
0–6 3 ‑ Modifiable
in any states
A9‑11 43275 Asynchronous motor
acceleration/
deceleration time
under SVC
0.1s to 3000.0s 20.0 s Modifiable
in any states
To Next Page
Loading...
