Inovance MD800 Series - Page 46

Commissioning and Trial Run
‑45‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
FA‑28 64028 Grid voltage Utr upon
4th fault
‑ 0.0 V Modification
prohibited
FA‑29 64029 Three‑phase
unbalance factor
upon 4th fault
‑ 0.00 % Modification
prohibited
FA‑30 64030 DI state upon 4th
fault
‑ 0.0 ‑ Modification
prohibited
FA‑31 64031 DO/RO state upon 4th
fault
‑ 0.0 ‑ Modification
prohibited
FA‑32 64032 Stop command sent
by power supply unit
upon 4th fault
1: Ready to run
2: Coast to stop
3: Stop according to preset
mode
0.0 ‑ Modification
prohibited
FA‑33 64033 Total power‑on time
(in hours) upon 4th
fault
‑ 0.0 h Modification
prohibited
FA‑34 64034 Total power‑on time
(in minutes) upon 4th
fault
‑ 0.0 min Modification
prohibited
FA‑35 64035 Total power‑on time
(in seconds) upon 4th
fault
‑ 0.0 s Modification
prohibited
FA‑40 64040 3rd (3rd latest) fault
code
‑ 0.0 ‑ Modification
prohibited
FA‑41 64041 3rd fault subcode ‑ 0.0 ‑ Modification
prohibited
FA‑42 64042 Bus voltage upon 3rd
fault
‑ 0.0 V Modification
prohibited
FA‑43 64043 Heatsink temperature
upon 3rd fault
‑ 0.0 °C Modification
prohibited
FA‑44 64044 Ambient temperature
upon 3rd fault
‑ 0.0 °C Modification
prohibited
FA‑46 64046 Grid voltage Usr upon
3rd fault
‑ 0.0 V Modification
prohibited
FA‑47 64047 Grid voltage Ust upon
3rd fault
‑ 0.0 V Modification
prohibited
FA‑48 64048 Grid voltage Utr upon
3rd fault
‑ 0.0 V Modification
prohibited
FA‑49 64049 Three‑phase
unbalance factor
upon 3rd fault
‑ 0.00 % Modification
prohibited
FA‑50 64050 DI state upon 3rd
fault
‑ 0.0 ‑ Modification
prohibited
FA‑51 64051 DO/RO state upon 3rd
fault
‑ 0.0 ‑ Modification
prohibited