Inovance MD800 Series - Page 47

Commissioning and Trial Run
‑46‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
FA‑52 64052 Stop command sent
by power supply unit
upon 3rd fault
1: Ready to run
2: Coast to stop
3: Stop according to preset
mode
0.0 ‑ Modification
prohibited
FA‑53 64053 Total power‑on time
(in hours) upon 3rd
fault
‑ 0.0 h Modification
prohibited
FA‑54 64054 Total power‑on time
(in minutes) upon 3rd
fault
‑ 0.0 min Modification
prohibited
FA‑55 64055 Total power‑on time
(in seconds) upon 3rd
fault
‑ 0.0 s Modification
prohibited
FA‑60 64060 2nd (4th latest) fault
code
‑ 0.0 s Modification
prohibited
FA‑61 64061 2nd fault subcode ‑ 0.0 ‑ Modification
prohibited
FA‑62 64062 Bus voltage upon 2nd
fault
‑ 0.0 V Modification
prohibited
FA‑63 64063 Heatsink temperature
upon 2nd fault
‑ 0.0 °C Modification
prohibited
FA‑64 64064 Ambient temperature
upon 2nd fault
‑ 0.0 °C Modification
prohibited
FA‑66 64066 Grid voltage Usr upon
2nd fault
‑ 0.0 V Modification
prohibited
FA‑67 64067 Grid voltage Ust upon
2nd fault
‑ 0.0 V Modification
prohibited
FA‑68 64068 Grid voltage Utr upon
2nd fault
‑ 0.0 V Modification
prohibited
FA‑69 64069 Three‑phase
unbalance factor
upon 2nd fault
‑ 0.00 % Modification
prohibited
FA‑70 64070 DI state upon 2nd
fault
‑ 0.0 ‑ Modification
prohibited
FA‑71 64071 DO/RO state upon
2nd fault
‑ 0.0 ‑ Modification
prohibited
FA‑72 64072 Stop command sent
by power supply unit
upon 2nd fault
1: Ready to run
2: Coast to stop
3: Stop according to preset
mode
0.0 ‑ Modification
prohibited
FA‑73 64073 Total power‑on time
(in hours) upon 2nd
fault
‑ 0.0 h Modification
prohibited
FA‑74 64074 Total power‑on time
(in minutes) upon 2nd
fault
‑ 0.0 min Modification
prohibited