Inovance Monarch NICE-L-C-4002 - Technical Specifications

1 Product Information
-
30
-
1.4 Technical Speci󶍾cations
󶙽󶍾
Item 󶍾
Input power
supply
Phase number,
voltage, and frequency
200 V class: single-phase 220 V to 240 V, 50/60 Hz
400 V class: three-phase 380/400/415/440/460 V, 50/60
Hz
Allowed voltage
change
-15% to +10%
Allowed frequency
change
-5% to +5%
Capacity to withstand
transient voltage drop
200 V class:
The system continues to run at over 150 VAC. When
the voltage is reduced to below 150 VAC from the rated
input state, undervoltage protection is enabled after
the system continues to run for 15 ms.
400V class:
The system continues to run at over 300 VAC. When
the voltage is reduced to below 300 VAC from the rated
input state, undervoltage protection is enabled after
the system continues to run for 15 ms.
Basic features
Maximum number of
󶍿
󶍿
Elevator running
speed
󶙮
Number of elevators in
parallel/group mode
󶙮
Communication mode CAN bus serial communication
Operation functions Refer to product functions in introduction.