Insignia NS-46E480A13 User Manual

5
Insignia 46"/55" 1080p LED TV
www.insigniaproducts.com
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the base to the stand column with the
four short screws (provided).
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four screws that secure the stand
column to the TV screen, then remove the stand
column.
3 Secure the stand cover to the back of the TV
screen using the four screws you just removed.
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Model Screw type Screw length # of screws
NS-46E480A13 M4 12 mm 4
NS-55E480A13 M6 12 mm 4
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
“Miscellaneous
” on page 51.)

Insignia NS-46E480A13 Specifications

General

Brand	Insignia
Model	NS-46E480A13
Category	LED TV
Language	English