Insignia NS-48D420NA16 - Connecting External Speakers or a Sound Bar; Digital Audio

27
Insignia 48" 1080p 60Hz LED TV
www.insigniaproducts.com
Connecting external speakers or a sound bar
You can connect external speakers using:
• Digital audio
•Analog audio
Digital audio
1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (Optical) jack on your TV and to the
optical AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 On your TV’s Audio menu, highlight Digital Audio Format/Audio Delay, then press ENTER or
X. Set the Audio
Format option to PCM. See the Digital Audio Format/Audio Delay option in Adjusting sound settings on page 47.
Digital optical audio cable
Digital speaker system
Side of TV
Digital optical
audio cable
connector
Digital optical
audio jack
On your TV
Sound bar