28
NS-48D420NA16 Insignia 48" 1080p 60Hz LED TV
www.insigniaproducts.com
Analog audio
1 Make sure that your TV’s power cord is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the /AUDIO OUT jack on your TV and to the AUDIO IN jacks on the
analog speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
5 On your TV, set the Headphone/Audio Out option on the Audio menu to Headphones/Audio Out Variable or
Audio Out Fixed. See the Headphone/Audio Out option in Adjusting sound settings on page 47.
Note
When you connect an analog system or sound bar to the /AUDIO OUT
jack, the TV speakers are muted.
Audio cable
Analog speaker system
Side of TV
Audio cable
connector
/AUDIO OUT
jack
On your TV
Sound bar
To Next Page
Loading...
