9
Insignia 48" 1080p 60Hz LED TV
www.insigniaproducts.com
TV components
Your TV has built-in controls for adjusting basic
settings and several sets of jacks for connecting
devices to your TV.
This section contains information about:
•Package contents
•TV buttons
•Side jacks
• Remote control
Package contents
•48" LED TV
• Remote control and batteries (2 AAA)
• TV stands and screws (4 pcs)
• Wall-mount spacers (4 pcs)
• M6 wall-mount screws (30 mm length) (4 pcs)
•Power cord
• Quick Setup Guide
• Important Information
Front
TV buttons
# Item Description
1
Remote control
sensor
Receives signals from the remote
control. Do not block.
2
Power indicator
Turns off when your TV is on.
Lights red when your TV is off
(standby mode).
# Item Description
1 MENU
Press to open the on-screen
menu. For more information, see
Navigating the menus on
page 37.
2
VOL+/VOL–
Press to increase or decrease the
volume.
3 INPUT
Press one or more times to select
the video input source you want,
then wait a few seconds. Your TV
switches to the source you
selected. For more information,
see Selecting the video input
source on page 35.
In menu mode, press to confirm
selections.
4
POWER
Press to turn your TV on or off
(standby mode).
Warning: When your TV is off,
power still flows through it. To
completely disconnect power,
unplug the power cord.
5 CH /CH
Press to go to the next or previous
channel in the channel list. For
more information, see Selecting a
channel on page 37.
In menu mode, press to highlight
options or settings.
To Next Page
Loading...
