Insignia NS-48D420NA16 - Aspect Ratio and Power On Mode

46
NS-48D420NA16 Insignia 48" 1080p 60Hz LED TV
www.insigniaproducts.com
Automatically adjusting the aspect ratio
Auto Aspect Ratio automatically changes how the
picture looks on the screen (aspect ratio) based on the
TV program you are viewing.
1 Press MENU.
2 Press
W or X to highlight CHANNELS, then press T
or ENTER.
3 Press
S or T to highlight Auto Aspect Ratio, then
press ENTER or X.
4 Press
S or T to select On (automatically adjust the
aspect ratio) or Off (does not automatically adjust
the aspect ratio), then press ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Setting the power on picture mode
You can set the picture mode your TV uses when you
turn it on.
1 Press MENU.
2 Press
W or X to highlight HELP, then press T or
ENTER.
3 Press
S or T to highlight Power on in Vivid
Mode, then press ENTER or
X.
4 Press
S or T to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the picture
mode it was in before you turned it off ), then press
ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.