EasyManua.ls Logo

Insignia NS-59P680A12 - Connecting a VCR; Connecting a Camcorder or Game Console

Insignia NS-59P680A12
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
NS-51P680A12/NS-59P680A12
www.insigniaproducts.com
Connecting a VCR
To connect a VCR:
1 Turn off your TV and all connected equipment.
2 If the antenna or cable TV cable is connected to
your TV, disconnect the cable from your TV.
3 Connect the antenna or cable TV cable to the
ANT IN jack on the VCR.
4 Connect a coaxial cable (not included) between
the ANT IN jack on the back of your TV and the
ANT OUT jack on the back of the VCR.
5 Connect a video cable (not included) between
the AV IN 1 (Y/VIDEO) jack on the back of your
TV and the VIDEO OUT jack on the VCR.
6 Connect an audio cable (not included) between
the AV IN 1 R-AUDIO-L jacks on the back of
your TV and the AUDIO OUT jacks on the VCR.
7 Turn on your TV, then turn on the VCR.
Connecting a camcorder or game console
To connect a camcorder or game console:
1 Turn off your TV and all connected equipment.
2 Connect an video cable (not included) between
the AV IN 1 (Y/VIDEO) jack on the back of your
TV and the AV VIDEO OUT jack on the
camcorder.
3 Connect an audio cable (not included) between
the AV IN 1 R-AUDIO-L jacks on the back of
your TV and the AUDIO OUT jacks on the
camcorder or game console.
4 Turn on your TV, then turn on the camcorder or
game console.
Note
If the VCR is a “mono” (non-stereo) VCR, use a
Y connector to connect to the AV IN 1 R-AUDIO-L
jacks of the TV, or connect the audio cable to the
AV IN 1 R jack.
Back of TV
From ANT OUT on VCR to
ANT IN on back of TV
Video cable
Audio cable
Note: The yellow connector on
the video cable plus into the
green AV IN 1 (Y/VIDEO) jack
on the back of your TV.
Note: The coaxial cable
connects to the ANT OUT jack
on the VCR to the ANT IN jack
on the back of your TV.
Notes
•The AV IN 1 VIDEO (Y/VIDEO) jack is the same
as the COMPONENT IN 1 (Y/VIDEO) jack, and
the AV IN 1 R-AUDIO-L jacks are the same as
the COMPONENT IN 1 R-AUDIO-L jacks.
If the camcorder or game console has an HDMI
jack, you can connect it to the HDMI IN 1 (DVI)
or HDMI IN 2 jack on the back of your TV. For
more information, see “Connecting an HDMI
device” on page 13.
Back of TV
Video cable
Audio cable
Note: The yellow connector on
the video cable plus into the
green AV IN 1 (Y/VIDEO) jack on
the back of your TV.

Table of Contents

Related product manuals